SPL Director - Digital 0

To Next Page

To Previous Page

DIP switches

Digital 

With the DIP switch  you can mute the outputs, if there is no signal at the digital input.

DIP switch : ON = If there is no signal at the digital input (digital ) the outputs are muted.

Please note: some audio devices with digital outputs might produce a signal which is not digital  or even on

lower values ( –  –  – – ) , even when there is no playback. The output of the Director is muted with a relay.

You might hear quiet clicks when the signal of the selected input toggles between digital  and another value.

Other manuals for SPL Director