SPL Phonitor x - DIP Switches; Level Increase of the Headphone Output; Attenuate the Sensitivity of the VU Meters

26
DIP switches
With the DIP switches () on the bottom of the unit the following settings can be chosen:
Level increase of the headphone output
By using the DIP switches  and  you can increase the level of the headphone outputs to better feed power-hun-
gry headphones.
DIP switch : ON = The headphone output is boosted to + dB.
DIP switch : ON = The headphone output is boosted to + dB.
DIP switch  and : ON = If both DIP switches  and  are ON, a boost of + dB is applied.
Attenuate the sensitivity of the VU meters
With DIP switch  you can attenuate the sensitivity of the VU meter by  dB. With the switch activated, a value of
+ dB input level can be displayed.
DIP switch : ON = The sensitivity of the VU meter is attenuated by  dB. In this case  dB on the VU meter
represent a value of + dBu.
I
F
R
B