SPL Phonitor x - Slave Thru; Standby of Connected Performer s800 Power Amp

27
Slave Thru
By using DIP switches  and  the chosen input passes directly to the outputs.
DIP switch : ON = The chosen input passes directly to the XLR output without being affected by the volume con-
trol. (Slave Thru).
DIP switch : ON = The chosen input passes directly to the RCA output without being affected by the volume con-
trol. (Slave Thru).
Standby of connected Performer s power amp when set to
Headphone
By using the DIP switch  units which are connected to AMP CTL ( Performer s power amp) are set to standby
to save power when the output selection is set to Headphone.
DIP switch : ON = Units which are connected to AMP CTL ( Performer s power amp) are switched into
standby to save power when the output selection is set to .
I
F
R
B