EasyManua.ls Logo

SPM GT1 Touch - Start Defrost Time Setting; Stop Defrost Time Setting

SPM GT1 Touch
77 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data di Marzo, 2012
5
Pag. : 61/76
START DEFROST (Рис. 21): you can set the
start defrost time in terms of hours and
minutes.
STOP DEFROST (Рис. 22): you can set the
stop defrost time in terms of hours and
minutes; after that time the unit will start
operating in PREPARATION mode.
During the automatic defrost the DEFROST
button is still functioning.
ATTENTION: once set the automatic defrost, the
unit will keep it automatically; this means that
when the unit is switched on it will operate as
set (if the switching on time is inside the
automatic defrost period it will operate in this
mode, if it is outside, it will operate in
PREPARATION mode).
ATTENTION: in order to disable the automatic
defrost, it is necessary to make both the start
and the end defrost hours coincide. This also
means that it is not possible to set the start and
the end of the automatic defrost period inside
the same hour of the day (for example: it is not
possible to start the automatic defrost at 17.00
and to stop it at 17.59).
Рис.
21
Рис.
22

Related product manuals