Need help?Do you have a question about the SPM STG-02 and is the answer not in the manual?
Details the physical components, connectors, and controls of the STG-02 device.
Describes setting amplitude and frequency for single pulse shock tests.
Details generating trains of pulses with mixed amplitudes for testing.
Explains how to perform TLT tests and recognize transducer types.
Provides detailed settings for frequency and amplitude in single frequency vibration tests.
Explains settings for mixed frequency vibration tests, including frequency ranges and amplitude.
Specific recommendations for testing A30/T30 instruments, including pulse modes and tolerances.
Specific recommendations for testing A2011/T2001 instruments, similar to A30/T30 but with frequency differences.
Guidance for testing the MG-4, referring to its specifications for vibration channels.
Instructions for testing BMM/BDM units, including TLT test disabling and specific settings.
Test recommendations for VMM/VDM series instruments, focusing on VIB test with TRV-18.
Guidance for testing the BMS measuring unit, setting TLT alarm and using single pulse mode.
Specific recommendations for testing the VCM-20, focusing on VIB test with TRV-20.
Testing guidance for VIB-10A, focusing on VIB test with TRV-12.
Testing guidance for VIB-10B, focusing on VIB test with TRV-22.
Recommendations for testing VIB-20, especially for normal configuration and VIB test with TRV-01.
Guidance for testing BAS-10, setting continuous reading and performing SPM/TLT tests.
Lists simulated transducers, pulse repetition frequency, amplitude, resolution, and accuracy.
Details simulated transducers, adjustable simulation, frequency choices, and velocity output.
Lists temperature range, power supply, consumption, size, weight, keypad, and display.
General| Brand | SPM |
|---|---|
| Model | STG-02 |
| Category | Test Equipment |
| Language | English |
To Next Page
