Need help?Do you have a question about the sprecher + schuh PCEC Series and is the answer not in the manual?
Overview of the installation, set-up, and typical operation of the Sprecher + Schuh elevator starter.
Description of the starter's components: base controller and fault contactor.
Overview of advanced motor control and diagnostics features of the PCEC elevator panel solution.
Guide to selecting the correct PCEC controller panel based on horsepower, voltage, and wiring.
Procedure for unpacking the starter panel and inspecting for shipping damage.
Guidelines for mounting the starter panel, including clearance requirements for airflow.
Panel dimensions and weight for 32, 51, and 64 Amp Elevator Panels.
Panel dimensions and weight for 74, 104, 147, and 234 Amp Elevator Panels.
Guidance for proper installation of the controller, including electrical noise and capacitor use.
Torque specifications for PCE controller and fault contactor terminals for wire size.
Wiring diagrams for DELTA connection, showing incoming lines, PCE controller, and motor connections.
Diagrams and tables for DELTA connection motor wiring for 6, 12 lead motors.
Wiring diagrams for LINE connection, showing incoming lines, PCE controller, and motor connections.
Diagrams and tables for LINE connection motor wiring for 3, 9 lead motors.
Schematic of typical control wiring for a DELTA connected PCEC controller.
Schematic of typical control wiring for a LINE connected PCEC controller.
Explanation of PCEC controller programming via dipswitches, with default settings.
Detailed tables for overload trip class, reset modes, and auxiliary contact settings.
Procedure for setting the motor FLA dial on the PCE controller based on nameplate data.
Diagram showing input and output timing for basic timing, no soft stop.
Graphical representation of motor overload trip curves for Class 10, 15, and 20.
Timing diagram illustrating control power, start enable, fault contact, and aux contact states.
Overview of topics for troubleshooting and maintenance of the PCEC controller.
Explanation of LED fault indications and fault types with possible solutions.
Step-by-step guide for troubleshooting common issues based on device status and fault codes.
List of replacement parts for PCEC panels, controllers, contactors, and fans.
Power and control circuit specifications, including voltage, current, and frequency ratings.
Short circuit capabilities and auxiliary contact specifications.
Mechanical specifications including resistance to vibration and shock.
Environmental operating conditions such as temperature, altitude, humidity, and pollution.
Product tested to Council Directive 89/336/EC Electromagnetic Compatibility (EMC).
Product tested to Council Directive 73/23/EEC Low Voltage.
General| Brand | sprecher + schuh |
|---|---|
| Model | PCEC Series |
| Category | Controller |
| Language | English |
To Next Page
