Valet mode
In order to select the Valet mode level press the main selection button
when the desired level is displayed on the LED display .
For example , in order to choose the 2
nd
level of Valet mode (limit
acceleration by 65%) , choose the number 2 with the arrow buttons
and press the main selection button to select.
Once you have selected the desired Valet mode level, you will be
requested to enter your PIN in order to Store the Valet mode.
Press arrow to choose
1st digit of PIN (0-9)
1
st
dash is blinking
to enter 1
st
digit of PIN
Press SET to store
1
st
digit of PIN.
1
st
PIN digit
To Next Page