2A. Basic Operation 11
Basic Operation
Answering Calls
When connected to your Sprint Phone Connect, your phone
will ring exactly as if would it connected to a landline.
䢇 Lift the handset on any connected phone to answer
a call.
Reset Settings
Default Reset
If you want to clear any changes you have made to
your Sprint Phone Connect’s settings and reset it to the
default settings:
1. Lift the handset on any connected phone.
2. Press .
3. Enter the four-digit lock code (default is “0000”).
4. Press to reset. You will hear an error tone if the
reset was unsuccessful.
Activation Reset
To reset your device’s activation over the Sprint network:
1. Lift the handset on any connected phone.
2. Press .
3. Enter the six-digit MSL code. (The default code is
“000000.”)
4. Press to reset.
PRL Update
This feature can be used to update your device’s PRL
(preferred roaming list).
1. Lift the handset on any connected phone.
2. Press .
3. Enter “0000.”
4. Press to update your PRL. If the update was
unsuccessful, you will hear an error tone.
Note: Be sure your device shows it is getting a strong
signal when you update your PRL.
To Next Page
Loading...