Sprint Phone - Specifications

18 3A. Advanced Settings
1.
Make sure the telephone is working.
2. Check the Power LED to make sure your device is
getting power.
3. Check the antenna to make sure it is tightly connected.
4. Next move the Sprint Phone Connect to another
location within your home.
If, after taking the above steps you still don’t have a dial
tone and the Signal LED is off, contact Sprint Customer
Support.
Specifications
Item Description Remarks
Air Interface CDMA2000 1X
RF Frequency 800MHz/1900Mhz Dual band
LED Indicator - 3 multi color
Power, Signal &
MODE/MSG
Green, Red, Off
Interface - 2 RJ-11 Ports (bridged),
Max 4 REN
-DC power Jack
-Power ON/OFF Switch
- TNC Connector for
CDMA antenna with
GPS antenna
Special Feature AGPS for E911 Service
Automatic Sending Caller
ID(DTMF, Bellcore)
Tone Dial, No service, Howler,
Stutter, Menu OK, Menu
NOK
Call feature Hook Flash
Call Waiting
Call Forwarding
Three-way Calling
Battery Li-ion rechargeable battery
Capacity: 1800mAh
(Standard)
* Stand by time: >10 hrs
* Talk time: >1.5 hrs
Power Adapter - Input: AC100-240V, 50/
60Hz
- Output:5V 2000mA
Dimension - Size: 165 X 158 X 26
(mm)
- Weight: 310g
With standard battery
Operating
Condition
-Temperature: -10ºC ~
50ºC
- Relative humidity :
10~95%
- Air pressure : 86~106kpa