14 3A. Advanced Settings
⽧ Call ID (page 14)
⽧ Call Waiting (page 14)
⽧ 3-Way Calling (page 15)
⽧ Voicemail Service (page 15)
⽧ Troubleshooting (page 17)
⽧ Specifications (page 18)
Call ID
Caller ID allows people to identify a caller before
answering the phone by displaying the number of the
incoming call. If you do not want your number
displayed when you make a call, follow these steps.
1. Press .
2. Enter a phone number.
To permanently block your number, call Sprint
Customer Service.
Setting Caller ID Mode
If the phone you have connected to your Sprint Phone
Connect has an LCD display, the caller's number will
appear by default. To change this setting:
䢇 Lift the handset of any connected phone.
• Press to disable the
Caller ID feature.
• For FSK (frequency shifting keying) type phones,
press to re-enable
Caller ID.
Call Waiting
When you’re on a call, Call Waiting alerts you to
incoming calls.
To use call waiting:
1. When you hear a beep from the receiver on any
connected phone during a call, it means a second
caller is trying to connect.
3A. Advanced
Settings
Note: FSK is the device default.
To Next Page
Loading...