EasyManua.ls Logo

SPS HUGO - TECHNICAL SPECIFICATIONS

SPS HUGO
19 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HUGO USER MANUAL
REV 1.3
SAFEGUARD POWER SOLUTIONS
855.484.6797
PAGE | 18
TECHNICAL SPECIFICATIONS
Model No.
HUGO-X1R
Input
AC Voltage
92-138V
Frequency
50 Hz/60Hz ±10%
Output
P.F. (VA/W) = 0.6
500VA/350W
Voltage 113-117V (at Battery Mode)
Frequency
Utility power mode: Output frequency is the same as input.
Battery mode: 50/60Hz ±0.1
Battery
Battery Charging
2.5 A, about 8-10 hours to charge a fully depleted 38A sealed lead acid battery
Protection
Utility Power Under
Voltage
Under 92 VAC
Utility Surge
Protection
When the utility power is >138VAC, it will transfer to battery mode
Battery Under Voltage
Protection
The UPS turns off automatically when the battery voltage too low
Overload or Short-
Circuit Protection
Battery mode: 105%<load<150%, it lasts 5s then protect; 150%
load, it lasts 200ms
then protect; when short circuit, it protects immediately.
Utility mode: 105%<load<130%, alarm but no protection; 130%
load<150%, it lasts 5min
then protect; 150%
load, it last 10s then protect.
Transfer Time
less than 15ms
Others
LED display
Refer to this manual
Weight
43 lbs.
Dimensions
(W x D x H)
14 x 9 x 12 inches
Operating
Temperature
23 to +104°F
Humidity
< 95% (non-condensing)

Related product manuals