SAFEGUARD POWER SOLUTIONS
• LED DISPLAY
• INSTALLATION
Ensure that the ON/OFF switch is in the “OFF” position during installation. The UPS
can store a significant amount of power for an extended period. AC/DC voltage
may be present at the output terminals even when the input terminals are
disconnected from power.
1. After unpacking the UPS, check whether there is any mechanical damage due to
transportation. If the UPS has been noticeably damaged, contact your sales
representative for assistance.
2. Tools Required
3. Remove the (4) hangers and (8) M5 screws. Tighten each hanger with (2) screws.
To Next Page
Loading...
