17
FLEX SeriesSPYPOINT
CELLULAR
DAILY SYNC TIME
All possible combinations
Allows you to choose the time when the camera makes its rst transfer of the day, each day.
Note: The camera transfers are congured by default with 6 times per day, determined from the time you activated
your camera. For example, if your camera was activated at 1:42 p.m., this will be the default rst transfer time.
The next transfer will be at 5:42 p.m.
SYNC FREQUENCY
1; 2; 4; 6; 12; each detection
Allows you to choose the number of transfers the device performs each day.
CELLULAR
Activated/not activated
Allows you to activate or deactivate the cellular mode.
Note that this setting will only take eect the next time the camera makes a transfer.
TAKE A PHOTO/VIDEO AT EACH SYNC
Activated/not activated
During the next transfer, the camera will automatically take a photo or a video and communicate it to your application.
Configuration
CAMERA COMMANDS
UPDATE FIRMWARE
Allows you to request a rmware update to your device.
TAKE A PHOTO/VIDEO
FLEX-S and FLEX-PLUS Only
Allows the user to request a photo/video instantly.
UPDATE STATUS
FLEX-S and FLEX-PLUS Only
Allows the user to request a status update instantly.
To Next Page
Loading...
