Spypoint FLEX-M - Manage Device; Image Capture

16
FLEX SeriesSPYPOINT
MANAGE DEVICE
Use the SPYPOINT app to congure your camera.
IMAGE CAPTURE
EDIT DEVICE NAME
All possible values
Allows you to name the camera for easy identication. This function is very useful for users with more than one camera.
RESTORE FACTORY SETTINGS
Restore
Allows you to reset the camera to its original state.
CAPTURE MODE
Photo; video; time-lapse;
time-lapse+
• Photo: The camera will capture photos based on the motion detection.
• Video: The camera will capture video clips based on motion detection.
• Time-lapse: The camera will capture photos based on a schedule set by the user.
• Time-lapse+: The camera will capture photos based on a schedule set by the
user and also capture photos based on the motion detection.
MOTION DELAY
Instant; 10 seconds; 20 seconds;
30 seconds; 40 seconds; 50 seconds;
1 minute; 3 minutes; 5 minutes;
10 minutes; 15 minutes;
20 minutes; 30 minutes; 1 hour
Allows you to choose the period of time to wait before the camera detects again and records the next photo/video.
A longer delay minimizes the number of photos and videos taken and therefore maximizes battery life. A shorter delay
maximizes surveillance in the area but consumes more power. Shorter delays are recommended when the camera
is used for security purposes.
SD PHOTO RESOLUTION
High/optimal
Allows you to determine the quality of the photos saved on your microSD card.
High quality: 36 MP or 28 MP* | Optimal quality: 2 MP (*FLEX-M Only).
MULTI-SHOT
1; 2; 3
Allows you to take 2 or 3 consecutive photos at each detection, with a 5-second delay between each photo.
SENSITIVITY
Low; normal; high
Allows you to choose the detection sensitivity of the device. A higher sensitivity allows you to detect movement
in front of the camera more eectively, so the camera will take more pictures.
Configuration