Spypoint FLEX-M - Troubleshooting; My Camera Does Not Turn On; My Camera Doesnt Have Good Service

24
FLEX SeriesSPYPOINT
ISSUES POSSIBLE SOLUTIONS
IN GENERAL
1. Slide the power switch to the OFF position and then back to the ON position.
2. Check that the power source is fully charged.
3. Format or Replace the MicroSD Card.
MY CAMERA DOES NOT TURN ON
1. Check to ensure the power source is fully charged.
2. Slide the power switch to the OFF position and then back to the ON position.
MY CAMERA DOESN'T HAVE GOOD SERVICE
1. Ensure the antenna is properly attached to the camera.
2. Move the camera to a dierent location.
Troubleshooting