Spypoint LINK-EVO - Initial Camera Setup and SIM ID; Detaching Camera from Bracket; Locating SIM ID for Registration

18
PREPARATION
REMOVE THE CAMERA FROM THE MOUNTING
BRACKET
• Push the tab to release the camera from the mounting
bracket.
• Remove the camera.
FINDING THE SIM ID
The SIM ID number can be found in the battery case.
You will need this number to complete the registration of
the LINK-EVO camera and connect to the application.
CHOOSE A POWER SOURCE
R6 (AA) BATTERIES
This camera can be
powered by 8 R6 (AA)
batteries (1.5V). The
use of alkaline or lithium
batteries is recommended.