EasyManua.ls Logo

SRAM ROCKSHOX RUDY XPLR - Lower Leg Assembly; 50;200 Hour Service; Lower Leg Installation

SRAM ROCKSHOX RUDY XPLR
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Lower Leg Assembly
Lower Leg Assembly
50/200 Hour Service Lower Leg Installation
Clean the upper tubes.Clean the upper tubes.
Apply grease to the inner surfaces of the wiper seals.Apply grease to the inner surfaces of the wiper seals.
Wiper seals may already be greased from the factory. Wiper seals may already be greased from the factory.
Do not apply extra grease to seals that already have Do not apply extra grease to seals that already have
grease on them.grease on them.
Hold the lower leg flat and inject 10 mL of suspension oil into each Hold the lower leg flat and inject 10 mL of suspension oil into each
lower leg.lower leg.
Keep the lower leg flat to prevent oil from leaking out.Keep the lower leg flat to prevent oil from leaking out.
NOTICE
Do not exceed the recommended oil volume per leg as this can
damage the fork.
1
2
RockShox Dynamic Seal Grease
10 mL: 0w-30 10 mL: 0w-30
3

Related product manuals