SRAM SPARC 16V User Manual

Sparc · July 2004
9
E
pulled
open
MAINTENANCE AND CARE
BATTERY
REMOVE BATTERY BOX
Press the button on the plug of
the battery cable to remove
the cable from the box.
» Turn both quick-release levers to
the “open“ position and then pull
them outwards.
» Remove the battery box from the
luggage carrier.
ATTACH BATTERY BOX
» Pull out both quick-release levers
and then turn them into the
“open“ position.
» Place the battery box onto the
luggage carrier.
» Push in the quick-release levers
and turn them into the “locked“
position.
» Push the plug of the battery cable
into the socket of the box.
Check that the battery box
has been correctly mounted.
» Protect the battery box from
hard jolts.
STORING THE BATTERY
If you intend to not use your bicycle for
a while, remove plug of the battery ca-
ble from the box. Store the batterie box
fully charged in a dry and cool place.
Recharge the battery at
least every 3 months.
REPLACING THE BATTERY
A battery that has become useless
must be replaced by a specialist
dealer.
The old battery must be disposed of
properly and will be accepted by the
dealer for recycling.
4
locked
4

SRAM SPARC 16V Specifications

General

Brand	SRAM
Model	SPARC 16V
Category	Bicycle Accessories
Language	English