Need help?Do you have a question about the SRAM SPECTRO T3 and is the answer not in the manual?
General| Brand | SRAM |
|---|---|
| Model | SPECTRO T3 |
| Category | Bicycle Accessories |
| Language | English |
The ideal drive for city and recreational bikes - simple to operate and adjust with precise gear selection.
Keep pedaling without effort as you change gears. Stop pedaling briefly if gear does not engage immediately.
When riding down steep slopes, use the second brake alternately to cool the coaster brake.
Process for removing the rear wheel from the bicycle, including releasing the adjuster sleeve and removing the pulley.
Process for fitting the rear wheel back onto the bicycle, aligning dropouts and securing with washers and nuts.
Specific procedures for T3 hubs with coaster or drum brakes, including clamp and fork unit attachments.
Procedure to adjust the brake for optimal performance and safety, by adjusting the screw until pads drag lightly.
Procedure for installing the shifter on the handlebar, including washer and grip placement.
Instructions for feeding the control cable into the locating sleeve and securing it with a clamping bolt.
Placing the shifter in gear position '3' and ensuring the gear is engaged by moving the crank.
Checking shift lever engagement in gear position '1' and readjusting the mechanism if necessary.
Spectro hubs have permanent lubrication; apply special grease to the brake sleeve for high loading if needed.
Do not clean gear hubs using water under pressure as it can cause malfunction.
Contact details for SRAM Corporation's World Headquarters in Chicago, Illinois, USA.
Contact details for SRAM Europe's headquarters in Amersfoort, The Netherlands.
Contact details for SRAM Taiwan's headquarters in Taichung County, Taiwan R.O.C.
To Next Page
