Need help?Do you have a question about the SRT CS100 and is the answer not in the manual?
Equipment must be installed per manual; not a replacement for judgment.
Discusses position source accuracy, product category, disposal, and manual accuracy.
Product compliance with RED 2014/53/EU and CE mark.
FCC Part 15 and Industry Canada compliance statements and warnings.
Explains AIS as a location and vessel information reporting system.
Diagram showing all physical connectors and status indicators on the unit.
Lists and briefly describes all items included in the product package.
Covers location, antenna, GPS, and power supply preparation.
How to connect the PC to the Coast Station for configuration.
Steps to access the web-based configuration interface.
How to set the Coast Station to forward AIS data to a remote server.
Defines parameters within the NMEA0183 TAG block for data transport.
How to set the station name for AIS receiver mode.
Command to query the duration of data in the internal log.
Steps to install the proAtoN PC application.
How to connect the Coast Station to a PC using a USB cable.
Configuring essential parameters for a real AIS AtoN.
Shows GPS receiver status and signal quality.
Lists applicable equipment standards and their definitions.
Details physical, environmental, electrical, and GPS specifications.
Details what manufacturing and design defects are covered by the warranty.
Lists conditions that invalidate the warranty, like wear and tear or tampering.
General| Brand | SRT |
|---|---|
| Model | CS100 |
| Category | Transceiver |
| Language | English |
To Next Page