6-6
TRANSMISSION AND BRAKE SYSTEM
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
P: PARK POSITION
Use this position to park your vehicle, warm up the engine,
or stay in a location for an extended length of time.
To shift into any other position, depress the brake pedal.
GEAR SELECTOR LEVER POSITIONS
R: REVERSE POSITION
• Use this position to reverse the vehicle.
To shift into “R” from “P” or “N”, completely stop the
vehicle and depress the brake pedal. When the shift lever
is in
“R”, parking aid system will be activated (If equipped).
• Never shift into “R” when the vehicle is moving.
• Please note that the vehicle may slowly move rearward when the
selector lever is at “R”.
WARNING
As a safety function, the gear selector lever cannot be moved into
“P” or “R” when the vehicle speed is above 7~10 km/h.
CAUTION
• Never shift into “P” when the vehicle is moving, or the transmis-
sion will be damaged.
• Stop the vehicle completely before shifting into “P”.
• To shift from the “P” position to another position, the ignition
switch must be turned to “ON” and the brake pedal should be
depressed. Any forcible attempts to move the selector lever from
“P” without the two procedures may damage the selector lever.
WARNING
06-Transmission and Brake System.p65 2006-10-03, ¿ÀÈÄ 2:34Page 6 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
