INTERIOR SWITCHES
4-24
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4-WHEEL DRIVE SWITCH*
4-WHEEL DRIVE SWITCH
Driving Mode Change
2H ⇔ 4H
• Automatic Transmission Equipped Vehicle
Stop the vehicle on a level ground and place the gear selector
lever into the “N” position. Turn the switch to the desired position
while depressing the brake pedal.
• Manual Transmission Equipped Vehicle
Stop the vehicle on a level ground and place the shift lever into
the “Neutral” position. Turn the switch to the desired position
while depressing the clutch pedal.
It is recommended to shift under a speed of 70 km while the ve-
hicle is being driven.
2H, 4H ⇔ 4L
• Do not drive your
vehicle over 80 km/h
in 4H mode.
NOTICE
Only for part time TC, not
available for 2-wheel drive
vehicle and all wheel drive
vehicle.
Select a proper driving
mode according to the
road conditions.
2H : 2-Wheel Drive
Rear wheel high speed driving mode. Use this mode
for normal or high speed driving on a public road or
highway.
4H : 4-Wheel Drive, High
Use this position on wet or slippery roads such as
sandy, muddy or snow covered roads.
4L : 4-Wheel Drive, Low
Use this position for maximum traction.
All Wheel Drive*
AWD stands for the full-time 4WD system.
AWD reduces wheel slippage and provides greater
driver control over the vehicle. AWD automatically
splits the torque between the front (40%) and rear
(60 %) wheels.
04-Interior Switches.p65 2006-10-03, ¿ÀÈÄ 2:34Page 24 Adobe PageMaker 6.5K/Win