LAMP
14-10
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
License plate lamp
LICENSE PLATE LAMP
1. Remove the ignition key from the
key cylinder.
2. To take out the license plate light
assembly, remove the two fasten-
ing screws on the license plate
light and push the assembly
downward.
3. Remove the lamp housing by turn-
ing the connector.
4. Remove the bulb.
5. Replace it with a new one.
6. Install in the reverse order of removal.
14-Lamp.p65 2006-10-03, ¿ÀÈÄ 2:37Page 10 Adobe PageMaker 6.5K/Win