VENTILATION, HEATING AND AIR CONDITIONING* 5–13
1. Open the glove box and remove it from
dash panel by pushing both holders to
arrow directions.
Do not apply excessive force to the
holders when removing the glove
box. It may cause a deformation of
holders and results in a loose
installation.
CAUTION
2. Unscrew the filter cover bolt inside
glove box and remove the cover.
3. Pull in the primary air conditioner filter to
remove it.
New Rexton05_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:36Page 13 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
