SERVICE AND MAINTENANCE 8–29
WHEELS AND TYRES
Factory-fitted tyres are matched to the chas-
sis and offer optimum driving, comfort and
safety. Consult your Ssangyong Dealer or
Ssangyong Authorized Service Operation
before changing over to different tyres or
rims and obtain their advice as regards tech-
nical possibilities. Use of unsuitable tyres or
rims may lead to accidents.
Tyre Inflation Pressure
Maintaining the specified tyre pressure is
essential for driver comfort, driving safety
and long tyre life. Check the tyre pressure,
including the spare wheel, at least every 14
days and prior to any long journey. The tyres
should be checked in a cold condition using
an accurate tyre pressure gauge.
Increased pressure resulting from tyre
warm-up must not be reduced, otherwise
the pressure may drop below the permis-
sible minimum.
Securely retighten valve caps after check-
ing pressure.
Incorrect inflation pressures will increase
tyre wear and will impair safety, vehicle han-
dling, comfort and fuel economy.
If the pressure is too low, this can result in
considerable tyre warm-up and internal dam-
age, leading to tread separation and even
to tyre blowout at high speeds.
Hidden tyre damage is not eliminated by sub-
sequently adjusting the inflation pressure.
LOCATION OF OVM TOOLS
AND CONNECTING ROD
• Fold the seat back of second seat, and
lift up the seat.
• Open the cover on the floor and pull out
the tools.
CAUTION
After folding the seat back, press the
upper portion of the seat back to
lock, then lift up the seat. If lifting it
up without locking, there could be
interventions between the rear con-
sole box cover lever and the seat to
be damaged.
Tyre Wheel PSI
P255/65R16 7JJ x 16 29
P235/70R16 7JJ/6.5JJ x 16 30
Tyre Pressure
New Rexton08_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:38Page 29 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
