3–20 INSTRUMENTS AND CONTROLS
CRUISE CONTROL INDICATOR*
(FOR GASOLINE ENGINE)
This indicator illuminates when the cruise
control is switched on.
6. Engage the connector under the drain
plug and press the primimg pump until it
becomes rigid.
7. Close the engine hood and start the
engine.
WARNING
• If the priming pump is not prop-
erly operated, air may get into the
fuel line. It may cause starting
problem or fuel system problem.
Make sure to perform the job in
step 6.
New Rexton03_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:30Page 20 Adobe PageMaker 6.5K/Win