INSTRUMENTS AND CONTROLS 3–41
HAZARD WARNING FLASHER
SWITCH
To turn on the hazard warning flashers,
push the hazard warning flasher switch. All
turn signal lamps will flash simultaneously
with the hazard warning indicators.
Push this switch again to turn them off.
The switch can be operated with the igni-
tion on or off.
Use the hazard warning flasher to warn
other drivers when you stop or park under
emergency conditions, or when your vehicle
becomes a traffic hazard. Avoid stopping on
the road if possible.
DIGITAL CLOCK
When the ignition is on, the time is displayed
in the digital clock.
There are three adjusting buttons for the digi-
tal clock.
1. H : Hour Adjusting Button
To go forward one hour, press H button
once using a pointer, such as ball-point
pen, with the ignition on.
To go forward continuously, keep this
button depressed.
WARNING
•
Never adjust the seat and side rear
veiw mirror positions while the ve-
hicle is moving.
•
Set and operate the seat and side
rear view mirror position memory
function only when the vehicle is
stationary.
New Rexton03_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:31Page 41 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
