8–42 SERVICE AND MAINTENANCE
BULB SPECIFICATION
Bulbs Rating
Head lamp
Position lamp
Low Beam/High Beam
Tail lamp
Tail/Stop lamp
Stop lamp
High mounted stop lamp
License plate lamp
Turn signal lamp
Side repeater lamp
Front room lamp
Rear room lamp
Front door/Rear door lamp
Rear
Front
Interior
55W/55W
5W
8W
8W/27W
27W
5W
5W
28W/8W
5W
8W
10W
5W
Turn signal lamp 27W
Glove box lamp 10W
Fog lamp 27W
Reversing lamp 27W
Number
2 each
2
2
2 each
2
4
2
2
2
2
2
2
2
1 each
2 each
1
CAUTIONS IN REPLACING
BULBS
CAUTION
•
Before replacing the bulb, turn the
ignition key to LOCK position and
turn OFF the relevant switch.
•
If you use unspecified bulb, the rel-
evant device will be damaged and
there could be a fire due to elec-
trical over loads. Use only speci-
fied capacity bulb.
CAUTION
Greasy fingers will cause stains, re-
sulting in a dull light.
•
Do not touch halogen bulbs with
bare hands.
•
Clean with a clean non fluffy cloth
using alcohol or white spirits.
New Rexton08_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:38Page 42 Adobe PageMaker 6.5K/Win