SERVICE AND MAINTENANCE 8–25
Location:
behind fuel filter (between fuel filter and
dashpanel) in engine compartment (engine
intake side)
Draining The Water From Water Separator
Drain the water from water separator when-
ever replacing the engine oil.
After draining the water, press the primimg
pump until it becomes rigid. Do not crank the
engine before doing this procedure. For the
detailed draining procedures, please refr to
“How to drain the water from fuel filter &
water separator” in water separator warn-
ing light section.
CAUTION
•
Replace the water separator ac-
cording to the specified mainte-
nance schedule.
•
Drain the water from water sepa-
rator whenever replacing the en-
gine oil.
•
After replacing the water separa-
tor or draining the water, press the
priming pump until it becomes
rigid.
If the filter is contaminated, the supplied fuel
will be reduced, main components will be
damaged due to entering the contaminated
materials and the performance of catalytic
converter will be deteriorated.
Replace the fuel filter according to the
specified maintemamce schedule.
• Service Interval
Replace at every 60,000 km
Gasoline Engine
New Rexton08_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:37Page 25 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
