SERVICE AND MAINTENANCE 8–37
WARNING
The use of different types or differ-
ent rating fuses could cause damage
to the electrical system and even start
a fire.
•
Always replace fuse with one with
the same rating.
•
Never use anything else but a fuse.
•
Do not use anything metal to re-
move fuse.
Fuse Ratings
You can find the descriptions on each fuse’s
function, location and capacity from the fuse
box cover.
Fuse Change
Pull out the blown fuse by using the fuse
puller from the fuse box and insert with the
same ratings of fuse.
CAUTION
If you remove the fuse when the elec-
trical power is supplying, the electri-
cal equipment could be damaged.
Replace the fuse when the ignition
key is in LOCK position.
FUSE
For fuse replacement, withdraw the cover
and extract blown fuse.
A defective fuse can be recognized by its
melted wire. A new fuse should only be in-
stalled after the cause of the trouble has
been located and eliminated.
Only fuses of the specified rating should be
installed. The rating is given on all fuses.
New Rexton08_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:38Page 37 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
