2–16 STARTING AND OPERATING
‘4H’ (4-Wheel Drive, High)
Use this for driving on wet or slippery roads
such as roads with snow, mud or sand.
This position provides greater traction than
2-wheel drive. The front hubs will be locked
automatically.
‘4L’ (4-Wheel Drive, Low)
Use this for maximum power and traction.
Use ‘4L’ for climbing or descending steep
hills, hard pulling in sand, mud or deep snow.
DRIVING POSITION
The 4WD LOW indicator light illuminates
when the 4WD switch is in 4L.
‘4H’ (4-Wheel Drive, High)
Use this for normal driving. This position
gives greater economy, quieter ride and least
drive train wear.
‘4L’ (4-Wheel Drive, Low)
Use this for maximum traction in slippery
roads, steep hills and rough roads.
4-WHEEL DRIVE SWITCH -
FULL-TIME (TOD)*
DRIVING POSITION
The 4WD indicator light illuminates when the
4WD switch is in ‘4H or 4L.
‘2H’ (2-Wheel drive)
This is rear wheel drive with high speed. Use
this for normal driving. This position gives
greater economy, quieter ride and least drive
train wear.
4-WHEEL DRIVE SWITCH -
PART-TIME*
New Rexton02_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:29Page 16 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
