STLINK-V3MODS reference design for voltage adapter UM2502
24/28 UM2502 Rev 2
Appendix C STLINK-V3MODS reference design for voltage
adapter
A document describing how to connect a voltage adapter to the STLINK-V3MODS is
available on the www.st.com/stlink-v3mods website under the CAD resources tab. This
document is given as a guidance and reference design helping customers how to realize a
1.65 to 3.60
V voltage adapter to the STLINK-V3MODS compact in-circuit debugger and
programmer for STM32.
To Next Page
Loading...