ST STM32 Nucleo board User Manual

References UM1724
54/55 DocID025833 Rev 4
8 References
9 Revision history
1. UM1075 - ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32, User
manual
Table 23. Document revision history
Date Revision Changes
10-Feb-2014 1 Initial release.
13-Feb-2014 2 Updated Figure 1, Chapter 4 and Table 9.
11-Apr-2014 3
Extended the applicability to NUCLEO-F302R8.
Updated Table 1: Ordering information, Section 5.11:
Arduino connectors and Section 5.12:
STMicroelectronics Morpho connector.
Updated Figure 1
10-June-2014 4
Updated the board figure: Figure 1.
Updated HSE and LSE configuration description:
Section 5.7.1, Section 4 and Section 5.7.2. Extended
the applicability to NUCLEO-F334R8, NUCLEO-
F411RE and NUCLEO-L053R8.

ST STM32 Nucleo board Specifications

General

Microcontroller	STM32
Board Series	Nucleo
Core Size	32-Bit
Program Memory Type	FLASH
Mounting Type	Through Hole
Connectivity	USB
Power Supply	USB
Headers	Arduino, ST morpho
Core Processor	ARM Cortex-M
Peripherals	ADC, PWM, SPI, UART, USB
Program Memory Size	Up to 2MB
Operating Temperature	-40°C to 85°C
Package / Case	Varies by model