ST STM32 NUCLEO-F042K6 User Manual

DocID028406 Rev 1 11/31
UM1956 Hardware layout and configuration
30
6 Hardware layout and configuration
The Nucleo-32 board is based on a 32-pin STM32 microcontroller in LQFP or UFQFPN
package.
Figure 2 illustrates the connections between the STM32 and its peripherals (ST-LINK/V2-1,
push button, LED, and Arduino Nano connectors).
Figure 3: Top layout view of the Nucleo-32 board and Figure 4: Bottom layout view of the
Nucleo-32 board show the location of these features on the Nucleo-32 board.
Figure 2. Hardware block diagram
06Y9
(PEHGGHG
67/,1.9
670
0LFURFRQWUROOHU
5(6(7
0LFUR
86%
,2
,2
%
567
$UGXLQR1DQR
FRQQHFWRU
/('
/'
$UGXLQR1DQR
FRQQHFWRU

ST STM32 NUCLEO-F042K6 Specifications

General

Microcontroller	STM32F042K6T6
Core	ARM Cortex-M0
Operating Voltage	3.3V
Flash Memory	32 KB
RAM	6 KB
Clock Speed	48 MHz
Pin Count	32
Digital I/O Pins	26
PWM Channels	6
On-board Debugger	ST-LINK/V2-1
GPIO Pins	26
DAC Channels	0
Connectivity	USB
Board Connectors	Arduino
Timers	5 (1x 16-bit advanced-control, 1x 16-bit general-purpose, 2x 16-bit basic, 1x SysTick)