ST STM32F0 Series Application Note

Introduction
This document helps customers to quickly locate information regarding touch sensing on STM32 microcontrollers.
It is applicable to STM32F0, STM32F3, STM32L0, STM32L1 and STM32L4 Series products. It lists all the existing application
notes and user manuals covering touch sensing. It indicates where the key aspects of touch sensing are documented.
It also explains how to build touch sensing applications on STM32L0538-DISCO and STM32F072B-DISCO discovery boards
using the STM32CubeMx graphical interface.
Getting started with touch sensing control on STM32 microcontrollers
AN5105
Application note
AN5105 - Rev 1 - September 2018
For further information contact your local STMicroelectronics sales office.
www.st.com

ST STM32F0 Series Specifications

General

Series	STM32F0
Core	ARM Cortex-M0
Operating Frequency	Up to 48 MHz
Flash Memory	16 KB to 256 KB
SRAM	4 KB to 32 KB
ADC Resolution	12-bit
ADC Channels	Up to 16
Operating Voltage	2.0 V to 3.6 V
DAC Resolution	12-bit (some series)
Communication Interfaces	I2C, SPI, USART, USB, CAN
Operating Temperature	-40°C to 85°C
Package Options	LQFP, TSSOP, UFQFPN, WLCSP