To Next PageTo Next Page
Need help?Do you have a question about the ST STM32F4DISCOVERY and is the answer not in the manual?
General| Microcontroller | STM32F407VGT6 |
|---|---|
| Core | ARM Cortex-M4 |
| Clock Speed | 168 MHz |
| Flash Memory | 1 MB |
| SRAM | 192 KB |
| GPIO Pins | Up to 82 |
| ADC Channels | 16 |
| ADC Resolution | 12-bit |
| DAC Channels | 2 |
| DAC Resolution | 12-bit |
| On-board Debugging | ST-Link/V2 |
| Display | No |
| Operating Frequency | Up to 168 MHz |
| LEDs | 4 |
| Timers | 14 |
| Communication Interfaces | I2C, SPI, USART |
| On-board Accelerometer | LIS302DL |
| USB | Yes (OTG FS) |
| Audio | Yes (CS43L22 Audio DAC) |
Defines jumper and solder bridge states for board configuration.
Step-by-step guide to configure and launch the discovery application.
Lists necessary hardware and software for using the board.
Lists compatible software development environments for the board.
Provides the specific order code for the STM32F4DISCOVERY board.
Details the core microcontroller, its memory, and processing capabilities.
Describes the integrated debugging and programming interface.
Covers motion sensor, microphone, and audio DAC capabilities.
Details the LEDs, pushbuttons, and USB OTG connector.
In-depth description of the MCU's features, performance, and benefits.
Explains the integrated debugging and programming interface.
Explains how the board is powered and the selection options.
Overview of LEDs, pushbuttons, audio, motion sensor, and USB OTG.
