ST STM32G071RBT6 User Manual

March 2021 UM2324 Rev 4 1/43
1
UM2324
User manual
STM32 Nucleo-64 boards (MB1360)
Introduction
The STM32 Nucleo-64 boards, based on the MB1360 reference board (NUCLEO-G070RB,
NUCLEO-G071RB, and NUCLEO-G0B1RE order codes) provide an affordable and flexible
way for users to try out new concepts and build prototypes with the STM32 microcontroller,
which provide various combinations of performance, power consumption, and features.
ARDUINO
®
Uno V3 connectivity and ST morpho headers provide easy means of expanding
the functionality of the Nucleo open development platform with a wide choice of specialized
shields.
The STM32 Nucleo-64 boards do not require any se
parate probe, as they integrate the
ST-LINK/V2-1 debugger/programmer. The STM32 Nucleo-64 boards come with the
com
prehensive free STM32 software libraries and examples that are available with the
STM32CubeG0 MCU Package.
Figure 1. STM32 Nucleo-64 board top view
Picture is not contractual.
www.st.com

ST STM32G071RBT6 Specifications

General

Brand	ST
Model	STM32G071RBT6
Category	Motherboard
Language	English

Summary

Features

Ordering Information

Product Codification

Development Environment

System Requirements

Lists the necessary software and hardware for development.

Development Toolchains

Lists supported IDEs and tools for development.

Quick Start

Getting Started

Step-by-step guide to begin using the STM32 Nucleo-64 board.

Hardware Layout and Configuration

Default Board Configuration

Details the default settings for jumpers and solder bridges on the board.

Embedded ST-LINK/V2-1 Overview

Describes the integrated ST-LINK/V2-1 debugger and programmer.

ST-LINK/V2-1 Drivers

ST-LINK/V2-1 Firmware Upgrade

On-Board Programming with ST-LINK

How to use the ST-LINK for on-board programming and debugging.

External Programming with ST-LINK

How to use the ST-LINK with external STM32 applications.

Power Supply and Selection

Details the various DC power supply options and their configurations.

Programming Without ST-LINK Power

Board LEDs and Push-buttons

Jumper, IDD Measurement, and Solder Bridge Configuration

Details jumper settings, IDD measurement, and solder bridge configurations.

Connectors

CN2 USB Micro-B Connector

ARDUINO Uno V3 Connectors

ST Morpho Connectors

STM32 Nucleo-64 Board I/O Assignment

Regulatory Compliance Statements