UM2411 Rev 2 21/61
UM2411 Hardware layout and configuration
60
5.11 User LEDs
Four general-purpose color LEDs (LD1, LD2, LD3, and LD4) are available as light
indicators. Each LED is in light-emitting state for a low level of the corresponding port of the
STM32H747XIH6 MCU.
5.12 Physical input devices
The STM32H747I-DISCO board provides a number of input devices for physical human
control:
• Four-way joystick controller with select key (B3)
• Wake-up / Tamper button (B2)
• Reset button (B1)
To Next Page
Loading...
