Introduction
The B-WL5M-SUBG1 STM32WL connectivity expansion board provides an affordable and flexible way for users to try out new
concepts and build prototypes with the STM32WL series STM32WL5MOC microcontroller module.
The B-WL5M-SUBG1 product requires a separate probe for programming and debugging. The STLINK-V3SET debugger can
be connected through a MIPI10/STDC14 cable.
The B-WL5M-SUBG1 STM32WL connectivity expansion board is provided with a USB Type-C
®
connector on an add-on
STMod+ adapter board.
The B-WL5M-SUBG1 product is provided with the STM32WL comprehensive software HAL library and various packaged
software examples available with the STM32CubeWL MCU Package.
Figure 1. B-WL5M-SUBG1 product
Picture is not contractual.
STM32WL5MOC connectivity expansion board
UM3127
User manual
UM3127 - Rev 1 - January 2024
For further information contact your local STMicroelectronics sales office.
www.st.com
To Next Page
Need help?
General
