ST X-NUCLEO-GNSS1A1

11
GNSS expansion board
Update Teseo-LIV3F FW using X-CUBE-GNSS1 (1/2)
11
2
1
From X-CUBE-GNSS1 software
resource package drag and drop
FW_Updater.bin (in Binary folder) on
Nucleo drive
• Connect the STM32 Nucleo board and the X-NUCLEO-GNSS1A1 expansion board
• Connect the STM32 Nucleo board to your PC
• Note: This application has been tested on Nucelo-F401RE only