EasyManuals Logo

Stabila LAX 600 Series User Manual

Stabila LAX 600 Series
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
LAX600series
5
en
4.1 Inserting and charging the battery
Only 12V Li-ion CAS System (Cordless Alliance System)
battery packs can be used.
Push in the battery pack in the direction of the arrow
until it engages. The battery pack must have an adequate
charge capacity. Fully charge the battery pack before initial
commissioning (observe the display).
Do not recharge a fully charged battery pack.
Check the charge capacity: Press the red button.
The battery pack must not be inserted in the charger.
LED display:
low charge capacity (<20%) – charge the battery pack
Do not allow the battery pack to become fully discharged.
Charging the battery pack:
Thoroughly read the safety instructions and operating
instructions for the battery pack.
Release the locking device and remove the battery pack
from the laser unit. Insert the battery pack into the charger.
Connect the charger to the mains plug.
Once the charging process has nished, the charger
automatically switches to conservation mode.
The battery pack can remain in the charger.
12V Li-Power 2.0Ah
12V Li-Power 4.0Ah (optional)
4. Commissioning
100%
1x 1x
20%
100%

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stabila LAX 600 Series and is the answer not in the manual?

Stabila LAX 600 Series Specifications

General IconGeneral
BrandStabila
ModelLAX 600 Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals