TECH 196 / 196 M / Dark Shadow
16
en
Flashing segments indicate the positions still to be calibrated.
Non-flashing segments indicate the positions already
calibrated.
8.3 Adjusting the sensor
Step 1:
Simultaneously press the „MODE“ and „CAL“ buttons.
Align the electronic spirit level accurately against a wall
and press the CAL button to confirm.
Step 1 must be performed with the vial. This ensures
that the spirit level, the horizontal vial and the
sensor are synchronised with each other.
Align the electronic spirit level accurately against a wall
and press the CAL button to confirm.
To Next Page
Loading...
