Stack-On GCB-1522 - Shelf Assembly; Securing the Cabinet

SECURING THE CABINET
NOTE: is cabinet must be mounted to wall studs and the
oor. Failure to do so will compromise the safety and security
of the cabinet.
Drill (2) 3/16" pilot holes into the wall studs lining up with the top
(2) mounting holes in the back of the cabinet. Secure the cabinet to
the wall using (2) lag bolts and washers.
Drill (2) pilot holes and secure the cabinet boom to the oor with
(2) lag bolts and washers.
NOTE: e cabinet must be secured to wall studs in the top holes
in the back of the cabinet so that it is anchored to the wall studs in
two locations. e cabinet must also be mounted to the oor. Use
the hardware provided or consult your hardware retailer for
fastening hardware for your particular mounting surfaces
Insert the plastic plugs in the cabinet's top mounting holes if you
are not installing the a Pistol-Ammo cabinet on the top of the
security cabinet.
IMPORTANT
Keep keys away from children. Keep this record of your serial and key
numbers in a secure place separate from your security cabinet. If you lose your
keys you will need this information as a reference for obtaining new keys. To
order a replacement key set, follow the instructions on the aached form.
STACK-ON PRODUCTS COMPANY
P.O. BOX 489
WAUCONDA, IL 60084
40651-1511
8
2
FRONT
FLANGE
e top shelf has 2 sets of holes for mounting it in the cabinet using 4
nuts and bolts. Position the shelf so the front and side anges point
down.
SHELF ASSEMBLY
SHELF MUST BE INSTALLED BEFORE MOUNTING THE
CABINET TO A WALL AND FLOOR.