Stack-On PFWS-080-B-D-E - Mounting to Wall Studs

PAGE 8 of 26 PFWS_2010
OWNER'S MANUAL
®
PERSONAL FIREPROOF AND
WATERPROOF SAFES

STEP 2
Posion the safe in
desired locaon.
Use a screw or pencil to mark the
2 mounng locaons on the wall.
NOTE: Make sure to mark
and secure to one wall stud
as shown.
Remove safe from marked locaon.
STEP 3
SECURING TO WOOD:
Using a 3/16" drill bit, drill a 2.5"
hole in marked locaon.
SECURING TO MASONRY:
Using a 3/8" drill bit, drill a 2.5" hole
in marked locaon.
WALL STUD
WALL STUD