EasyManua.ls Logo

Stack-On PC-1702-RFID User Manual

Stack-On PC-1702-RFID
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
40720-1702
1
16
Instructions
PC-1702-RFID
Tools Required:
Drill
Flat Head Screwdriver
10 mm Wrench
3/16” (5 mm) drill bit for drilling
into wood
Hardware Included:
(2) M6 x 20 mm
(3/4” long) Screws
(2) Washers
(2) Plastic anchors
®
Your Electronic Combination:
Serial #:
IMPORTANT
NOTE: You can store your Key #, Serial # and
Combination on Stack-On’s SECURE website –
stackon.com under Customer Service.
Storing your Key # or Combination will provide
instant access to this important information should
you ever lose your keys or your combination.
Only you will have access to this information.
• Record the serial number from the tag
on the back of the case.
• Record your combination number.
• Keep keys and your combination in a
secure place away from children.
• DO NOT STORE KEYS, RFID DEVICES
OR YOUR COMBINATION IN THE CASE.
CONTROL FEATURES
1. Key lock
2. Combination buttons
3. Reset button (inside case)
4. Battery Compartment (inside case)
5. RFID Sensor
5
REMOVE KEY
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for the Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provent reasonable protecon against harmful itererence in a
residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occor in a parcular installaon. If this equipment does cause harmful interference
to radio or television recepon, whitch can be determined by turning the equipment off and on, that user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:(1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operaon.
Cauon: Modificaons not authorized by the manufacturer may void users authority to operate this device.
CAN ICES-3 (B)/NMB-3(B).
Battery Disposal
Please dispose of the used batteries per municipal or provincial law.
Question and Answer IconNeed help?

Do you have a question about the Stack-On PC-1702-RFID and is the answer not in the manual?

Stack-On PC-1702-RFID Specifications

General IconGeneral
BrandStack-On
ModelPC-1702-RFID
CategorySafes
LanguageEnglish

Summary

CONTROL FEATURES OVERVIEW

Key Lock and RFID Access

Primary physical key and RFID sensor access mechanisms for the case.

Electronic Combination Interface

Interface for programming and using the digital access code.

IMPORTANT SAFETY AND USAGE GUIDELINES

Record Access Information and Secure Storage

Crucial steps to document and safely store combination and serial numbers.

FCC COMPLIANCE

Digital Device Regulations Statement

Statement regarding the equipment's compliance with FCC digital device regulations.

INITIAL CASE SETUP

Opening the Case with the Key

Instructions for opening the case using the provided key.

Installing and Managing Batteries

Battery installation, low battery indicators, and compartment handling.

USING THE RADIO FREQUENCY IDENTIFICATION (RFID) SYSTEM

Programming and Opening with RFID

Guide to recording RFID devices and opening the case via scan.

RFID Scan Lockout Scenarios

Explains system lockouts after repeated invalid RFID scans.

ELECTRONIC COMBINATION MANAGEMENT

Setting Up and Entering Your Combination

Instructions for programming, entering, and opening with the electronic combination.

Combination Entry Lockout Details

System behavior and lockout periods for incorrect code attempts.

CASE LOCATION AND SECURING

Optimal Installation and Mounting

Guidance on selecting location and permanently affixing the case.

Securing the Case with Cable

Method to secure the case to a fixed object using the provided cable.

SYSTEM SETTINGS AND RESET

Toggling Keypad Sound and Clearing Codes

How to manage keypad sound and reset all programmed codes.

REPLACEMENT PROCEDURES FOR ACCESSORIES

Requesting Replacement RFID Devices or Keys

Detailed steps required to order new RFID devices or keys.

Required Documentation for Replacements

List of necessary documents for ownership verification for replacements.

LIMITED ONE YEAR WARRANTY

Warranty Coverage, Exclusions, and Liability

Details warranty, exclusions, limitations on liability, and consumer rights.

Related product manuals