Stack-On PFWS-080-B-D-E - Securing to Wall Anchor

PAGE 9 of 26 PFWS_2010
OWNER'S MANUAL
®
PERSONAL FIREPROOF AND
WATERPROOF SAFES
STEP 4
SECURING TO WALL:
NOTE: Posion plasc wall anchor
in wall before placing safe in
mounng locaon.
Use plasc wall anchor to secure the
other back hole that is not centered
on a wall stud.
Posion safe in mounng locaon.
Posion lag screws through washers
and safe as shown in FIGURE 1.
Tighten screws using a socket wrench.

FIGURE 1
LAG SCREWS
WASHERS
WALL STUD
WALL ANCHOR