13
4.1 Switching Between Screens
4.1.1 The Select Button 4.1.2 The Adjust Button
•In Standby mode, press any button
to activate the instrument.
•In Standby mode, press any button
to activate the instrument.
•In the main screen, press the Select
Button to switch from clock readout
to temperature A readout.
•In the main screen, press the Adjust
Button to switch from odometer to
tripmeter A.
•In the main screen, press and hold
the Adjust Button for 3 seconds to
change the speed unit.
•Press the Adjust Button to switch
from tripmeter A to tripmeter B.
•In the tripmeter A readout, press and
hold the Adjust Button for 3 seconds
to reset tripmeter A.
•Press the Adjust Button to switch
from tripmeter B to max record.
•In the tripmeter B readout, press and
hold the Adjust Button for 3 seconds
to reset tripmeter B.
•Press the Adjust Button to switch
from max record back to the main
screen with odometer readout.
•In the max record readout, press and
hold the Adjust Button for 3 seconds
to reset max record.
•The main screen.
•Press the Select Button to switch
from temperature A readout to tem-
perature B readout.
•Press the Select Button to switch
from temperature B readout to volt-
meter readout.
•Press the Select Button to switch
from voltmeter readout to main
screen.
•The main screen.
To Next Page
Loading...
Need help?
General
