EasyManuals Logo

Stage6 S6-4080/OR User Manual

Stage6 S6-4080/OR
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
E.g.: The speed warning is to be
changed to 68 km/h.
•Press the Select Button to move
between digits.
•Press the Adjust Button to enter the
desired number.
E.g.: The speed warning has been
changed from 60 km/h to 68 km/h.
Setting range: 30–360 km/h (19–225
MPH). Setting unit: 1 km/h (MPH)
NOTE
Display range: 5 (500
RPM) – 50 (5000 RPM);
Display unit: 100 RPM
Display range: 5 (500
RPM) – 50 (5000 RPM);
Display unit: 100 RPM
NOTE
NOTE
Display range: 5,000–10,000 RPM
Display unit: 100 RPM
NOTE
Speed Warning
The speed warning lamp
lights on when the current
speed has reached the
set value.
•Press the Select Button to get to the
setting of the shift light.
E.g.: The shift light is to come on
at 9,500.
•Press the Adjust Button to enter the
desired value.
E.g.: The shift light setting has
been changed from 5,000 to
9,500 RPM.
•Press the Select Button to get to the
setting of pre-shift light B.
Shift Light
E.g.: The pre-shift light B is to come on
at 8,000 RPM, i.e. 1,500 RPM before the
actual shift light. The value that is to
be set is 15.
•Press the Adjust Button to enter the
desired value.
E.g.: The pre-shift light A is to come on
at 7,500 RPM, i.e. 500 RPM before shift
light B. The value that is to be set is 5.
•Press the Adjust Button to enter the
desired value.
E.g.: The setting value has been
changed to 15.
•Press the Select Button to get to the set-
ting of pre-shift light A.
E.g.: The setting value has been
changed to 5.
•Press the Select Button to get to the set-
ting of temperature alarm A.
Pre-Shift Light B
Pre-Shift Light A
E.g.: The range has been changed
from 0–10,000 RPM to 0–20,000
RPM.
•Press the Select Button to get to the
setting of the speed warning.
About the Shift Light Setting
First set the actual shift light, then pre-shift light B and then pre-
shift light A.
Pre-shift light A
(5) RPM
Pre-shift light B
(15) RPM
Shift light
9,500 RPM
Yellow Orange Red
About the Shift Light
If the shift light and the two pre-shift lights are set as 9500–15–05,
the 3 lamps will come on as follows:
Pre-shift light A
7,500 RPM
Pre-shift light B
8,000 RPM
Shift light
9,500 RPM
Yellow Orange Red

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stage6 S6-4080/OR and is the answer not in the manual?

Stage6 S6-4080/OR Specifications

General IconGeneral
BrandStage6
ModelS6-4080/OR
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals