S6
INSTRUCTIONS
DIGITAL SPEEDOMETER, UNIVERSAL
EN
16
•Press the Adjust Button to enter the
desired value.
• E.g.: Temperature alarm B has
been changed from 100 to 108 °C.
Setting range: 0–23 hours
Changing the time resets the
seconds.
NOTE
NOTE
• E.g.: The hours are to be
changed to 14.
•Press the Adjust Button to enter
the respective value.
Clock
•Press the Select Button to get to the
setting of the clock.
The red LED will come on accord-
ing to the setting for temperature
alarm B
.
NOTE
NOTE
Setting range: 0–59 minutes
Changing the time resets the
seconds.
NOTE
• E.g.: The hours have been
changed from 0 to 14.
•Press the Select Button to get to
the setting of the minutes.
• E.g.: The minutes are to be
changed to 05.
•Press the Adjust Button to enter
the respective value.
Alarm Light
• E.G.: The setting of the alarm light is
to be changed from “Auto LED” to “On
LED”.
•Press the Adjust Button to change the
setting.
• E.g.: The setting of the alarm light has
been changed from “Auto LED” to “On
LED”.
•Press the Select Button to get back to the
main screen.
•You are in the main
screen again.
Auto LED: The alarm light will func-
tion only when the external power is
connected..
On LED: The warning light will func-
tion all the time.
CAUTION
• E.g.: The minutes have been
changed from 00 to 05.
•Press the Select Button to get to
the setting of the alarm light.
Temperature Alarm A
Temperature Alarm B
The red LED will come on
according to the setting for
temperature alarm A.
NOTE
• E.g.: Temperature alarm A is to be
changed to 68 °C.
•Press the Select Button to move be-
tween digits.
•Press the Adjust Button to enter the
desired value.
• E.g.: Temperature alarm A has been
changed from 60 to 68 °C.
•Press the Select Button to get to the
setting of temperature alarm B.
• E.g.: Temperature alarm B is to be
changed to 108 °C.
•Press the Select Button to move
between digits.
To Next Page
Loading...
Need help?
General
