To Next PageTo Next Page
Need help?Do you have a question about the Stahlwille 730a/10 Quick and is the answer not in the manual?
Click-type mechanism that only loads during force application, no manual reset needed.
Mount for interchangeable insert/shell tools with QuickRelease safety lock.
Ergonomic adjuster, magnifying glass, and optimised handle for user comfort.
Dual stop signal and twin scales (N-m/ft-lb, N-m/in-lb) for clear indication.
Clockwise/anticlockwise use, overload protection, and easy calibration.
Efficient operation and fatigue-free working with ergonomic design.
Rapid setting via easy-action locking lever and wear-resistant trigger system.
Quick external adjustment and flexible rod principle for ease of use.
Ensures tools are not lost and enables rapid, safe tool changes.
This document describes the STAHLWILLE MANOSKOP No. 730a/10 Quick, a click-type basic torque wrench with a tool carrier for interchangeable insert tools. It is designed for service applications and offers precise torque measurement in a range of 180-880 in-lb (20-100 N-m).
The MANOSKOP 730a/10 Quick is a mechanical torque wrench that operates on a click-type principle. This means it provides a tactile and audible "click" signal when the preset torque is reached, indicating that the fastener has been tightened to the desired specification. A key feature is that the measuring element is only under load while force is being applied, eliminating the need for manual reset to zero after each use. This design contributes to the tool's long-term accuracy and reduces wear.
The wrench is equipped with a QuickRelease safety lock (for sizes 5-65), which ensures that insert tools are securely held in place but can be rapidly and safely changed. It features a mount for interchangeable insert/shell tools, allowing for versatility across various applications. The tool can be used for both clockwise and anti-clockwise tightening simply by turning the inserts over.
A wear-resistant trigger system with a flexible rod is central to its design. Unlike conventional torque wrenches with spiral springs, the STAHLWILLE system does not require resetting the wrench to zero after each job to unload the spring. This eliminates a key work step, saving time and contributing to the tool's durability and consistent measurement results over time. Any force applied to the tool after the "click" or in the opposite direction (e.g., for loosening a jammed screw) does not act on the trigger mechanism, preventing damage.
The MANOSKOP 730a/10 Quick is designed for user comfort and efficiency. It features rapid setting thanks to an easy-action locking lever in the handle. The ergonomically designed, non-slip adjuster includes a thumb recess, making it easy to set the desired torque value quickly and safely. An integrated magnifying glass in the display window aids in precise reading of the twin scales (N-m/ft-lb and N-m/in-lb). The handle is optimised for a convex shape, ensuring strain-free working.
The dual stop signal, which is both felt and heard, provides clear indication when the target torque is reached, enhancing user confidence and preventing overtightening. The QuickRelease technology facilitates fast and safe tool changes, ensuring that tools cannot be inadvertently lost during operation. The ability to use the wrench for both clockwise and anti-clockwise tightening by simply turning the inserts over adds to its versatility.
The design of the MANOSKOP 730a/10 Quick incorporates features that simplify maintenance and ensure long-term accuracy. The wear-resistant trigger system, which does not require resetting to zero after each use, significantly reduces wear on internal components, thereby extending the tool's lifespan and maintaining its calibration over time.
Calibration can be performed using STAHLWILLE's perfectControl® calibrating unit No 7794 or calibration system No 7706. A key advantage is that readjustment does not require disassembly of the torque wrench, simplifying the calibration process and reducing downtime. The tool comes with a certificate in accordance with DIN EN ISO 6789-2:2017, confirming its calibration accuracy. The quick adjustment mechanism allows for external adjustment of maximum and minimum values without needing to open the wrench.
General| Brand | Stahlwille |
|---|---|
| Model | 730a/10 Quick |
| Category | Power Tool |
| Language | English |
